Given below are two statements: 
Assertion (A): The bridges are declared unsafe after long use.
Reason (R): The bridges lose their elastic strength with time.
 
1. Both (A) and (R) are True and (R) is the correct explanation of (A).
2. Both (A) and (R) are True but (R) is not the correct explanation of (A).
3. (A) is True but (R) is False.
4. Both (A) and (R) are False.
Subtopic:  Elasticity |
 93%
Level 1: 80%+
Hints

Which, of the following materials, is the most elastic?
1. Steel 2. Rubber
3. Charcoal 4. Chalk
Subtopic:  Elasticity |
 85%
Level 1: 80%+
Hints

Given below are two statements: 
Assertion (A): An \(\mathrm{I} \text-\)shaped beam is preferred over a rectangular beam for supporting loads, such as traffic, on structures like bridges.
Reason (R): An \(\mathrm{I} \text-\)shaped beam reduces weight without compromising the strength.
 
1. Both (A) and (R) are True and (R) is the correct explanation of (A).
2. Both (A) and (R) are True but (R) is not the correct explanation of (A).
3. (A) is True but (R) is False.
4. Both (A) and (R) are False.
Subtopic:  Elasticity |
 80%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

advertisementadvertisement

premium feature crown icon
Unlock IMPORTANT QUESTION
This question was bookmarked by 5 NEET 2025 toppers during their NEETprep journey. Get Target Batch to see this question.
✨ Perfect for quick revision & accuracy boost
Buy Target Batch
Access all premium questions instantly
Given below are two statements: 
Assertion (A): Elastomers are used as vibration dampers.
Reason (R): Elastomers show elastic hysteresis.
 
1. Both (A) and (R) are true and (R) is the correct explanation of (A).
2. Both (A) and (R) are true but (R) is not the correct explanation of (A).
3. (A) is true but (R) is false.
4. Both (A) and (R) are false.

 
Subtopic:  Elasticity |
 80%
Level 1: 80%+
Hints

As a ball falls into a lake with a depth of \(200~\text m,\) it experiences a decrease in volume of \(0.1 \text{%}\) at the bottom. The bulk modulus of the material of the ball is:
(take \(g=9.8~\text{m/s}^2\))

1. \(19.6\times10^{-10}~\text{N/m}^2\)
2. \(19.6\times10^{10}~\text{N/m}^2\)
3. \(19.6\times10^{-8}~\text{N/m}^2\)
4. \(19.6\times10^{8}~\text{N/m}^2\)

Subtopic:  Elasticity |
 78%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.

Young’s modulus of steel is twice that of brass. Two wires of the same length and of the same area of cross-section, one of steel and another of brass, are suspended from the same roof. If we want the lower ends of the wires to be at the same level, then the weights added to the steel and brass wires must be in the ratio of:
1. \(1:2\)
2. \(2:1\)
3. \(4:1\)
4. \(1:1\)

Subtopic:  Elasticity |
 78%
Level 2: 60%+
NEET - 2015
Hints

advertisementadvertisement

The load versus elongation graph for four wires, all of the same length and made from the same material, is shown in the figure. One of the lines corresponds to the thinnest wire.

              
Which line represents the thinnest wire?
1. \(OC\)
2. \(OD\)
3. \(OA\)
4. \(OB\)
Subtopic:  Elasticity |
 77%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.

The Marina trench is located in the Pacific Ocean, and at one place it is nearly \(11 \) km beneath the surface of the water. The water pressure at the bottom of the trench is about \(1.1 \times10^8\) Pa. A steel ball of initial volume \(0.32\) m3 is dropped into the ocean and falls to the bottom of the trench. What is the change in the volume of the ball when it reaches the bottom? (Given: \(B_{\mathrm{steel}}=1.6 \times10^{11}\) N/m2)

1. \(1.01\times10^{-3}\) m3 2. \(2.2 \times10^{-4}\) m3
3. \(1.9 \times10^{-3}\) m3 4. none of these
Subtopic:  Elasticity |
 76%
Level 2: 60%+
Hints
Links